Multisession Mounter was useful in the mid 90's for Macintosh clone systems (Umax, etc...) that had a third party CD drive (also useful for any Mac OS 7.1 user before the Apple CD driver was released).  Only the first partition would mount,...

The System Software on the Macintosh II, IIx, IIcx, and SE/30 is unable to access more than 8 MB RAM. By using either MODE32 or Apple's 32-Bit System Enabler, the affected machines can properly address additional memory. MODE32...

It is also included an english bios flasher for both card, so you can convert a PC version card to a Mac compatible one.  

What is Kineticon? Simply put, Kineticon is a system extension that replaces selected icons on your Macintosh desktop with icon animations. Included with Kineticon is "Kineticon Editor". Kineticon Editor allows you to create your own...

FreeMIDI automatically detects what type of MIDI interface is connected to the Macintosh serial or USB ports, automatically detects what MIDI devices are connected to interface (it "knows" over 200 types of devices), and provides a...

Update your older Macintosh or PC with the PCI slot-based, OrangeLink FireWire PCI Board. With this addition to your system, you can take advantage of the latest high performance IEEE 1394 peripherals, including digital cameras and portable VST®...

SCSI Accelerator is a patch to the Mac's SCSI-dispatch code: the author reports that it substantially increases hard-disk throughput (especially if the disk is subsequently reformatted with a lower Interleaving ratio). Unknown Author....

Scrollability allows for easy scrolling, by hovering the mouse to the top or bottom edge of an active scrollable window or by "grab scroll" by approaching the same boundaries and clicking and holding when the hand cursor appears. It's...

Control panel to re-scan and (un)mount SCSI drives

SoftwareFPU allows you to use software that requires an FPU on a Mac without an FPU.

A mini finder replacement.

This is a tar ball of the files that existed on a A/UX 0.7 install, probably incomplete.

Swedish version of Mac OS 9.2.2 for eMac, tested, working on other machines as well.

ClockAdjust is a combination Control Panel device and INIT that keeps your Macintosh clock accurate by adjusting its value every week.  You can set the amount of the adjustment in the Control Panel. Several factors can influence how fast...

Every software revision should be this good. RAM Doubler 2.0 uses the same basic premise as the original — increasing memory without adding actual RAM — while introducing new features. Version 2.0 gives you a control panel to change...