Found 22 software entries in System from category: Firmware


iMac Firmware Update 1.2

iMac Firmware Update 1.2 (1999)
(Modified on 2020-08-30 07:42:50)

This is for tray-loading iMacs. The iMac Firmware Update 1.2 should be installed on all iMac computers used in NetBoot client environments. Features delivered with this update include improved support of NetBooting and minor improvements to Open...

Blank Board Serializer

Blank Board Serializer (2007)
(Modified on 2020-10-27 02:18:18)

Blank Board Serializer (BBS) is an Apple tool to set the System Serial Number (SSN) on a BLANK Mac Logic Board. It is typically used by Apple and it's Service Partners. Blank means that the SSN has never been set (such as on a new Logic...

Firmware Restoration CD 1.7

Firmware Restoration CD 1.7 (2007)
(Added on 2021-08-23 20:37:52)

This is a Intel Mac EFI Firmware Restoration CD version 1.7. It works with the following Macs for EFI recovery: iMac4,1, iMac4,2, iMac5,1, iMac5,2, iMac6,1, MacBook1,1, MacBookPro1,1, MacBookPro1,2, MacBookPro3,1, MacMini1,1 and...

PowerBook Firmware Update 4.1.8

PowerBook Firmware Update 4.1.8 (2001)
(Added on 2020-10-09 17:13:29)

Updates firmware for better FireWire performance in target disk mode.  The 4.1.8 firmware also adds a new check to confirm that the installed RAM is compatible, so it may or may not consider some or all of your RAM unusable if the RAM does not...

PowerMac G4 Firmware Update 4.2.8

PowerMac G4 Firmware Update 4.2.8 (2001)
(Modified on 2020-08-30 07:43:29)

The Power Mac G4 Firmware Update 4.2.8 will run only on Power Mac G4 and Macintosh Server G4 models with AGP graphics running Mac OS 9.1 or later from a local hard disk. If you are using Mac OS X on your Power Mac G4 or Macintosh Server G4, you must...

iMac G3 Firmware Update 4.1.9

iMac G3 Firmware Update 4.1.9 (2001)
(Modified on 2020-08-30 07:43:06)

The iMac Firmware Update 4.1.9 will only run on iMac G3 computers with slot-loading CD or DVD drives running Mac OS 9.1 or 9.2 from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or 9.2 writeable partition (not a CD,...

G4 Cube Firmware Update 4.1.9

G4 Cube Firmware Update 4.1.9 (2001)
(Modified on 2020-08-30 07:42:42)

The G4 Cube Firmware Update 4.1.9 will run only on G4 Cube models running Mac OS 9.1 or later from a local hard disk. If you are using Mac OS X on your Cube, you must start up from a local Mac OS 9.1 or later writeable partition (not a CD or network...




To date, Macintosh Repository served 2835962 old Mac files, totaling more than 571023.2GB!
Downloads last 24h = 1651 : 290591.4MB
Last 5000 friend visitors from all around the world come from:
32307 (Mac OS 7.5.3)
 
Let's chat about old Macs!