SCSI2SD Tools Disk / Easy Initialization
Applications
out of 10 (0 vote)
|
What is SCSI2SD Tools Disk / Easy Initialization? These are SCSI2SD Tools Disks for easy initialization of SCSI2SDs. Each image contains a minimal system 6.0.8, Lido 7.56 and the patched HD SC Setup. No changes are necessary to the SCSI2SD settings, if you want to use a 2GB image (which are the default settings). Unbox the SCSI2SD, insert any empty SD Card and go. Attention: only the Macintosh Plus needs specific settings: see screenshot (source: http://www.codesrc.com/mediawiki/index.php/Mac_Plus) You can boot your Mac with the disk, use Lido to initialize an empty standard formatted SD-Card (image size will be determined through the SCSI2SD setting you put in, by default 2GB) and then partition the volume as pleased with the HD Setup. Download SCSI2SD Tools Disk / Easy Initialization for Mac
(392.81 KiB / 402.24 KB)
800k disk image with minimal system 6.0.8 for Macintosh Plus / compressed w/ Stuffit  31 /  2021-06-16 /  e2bdc81baf124e9b73be45cac4e05605844c59e9 / 
/ 
(399.72 KiB / 409.31 KB)
800k disk image with minimal system 6.0.8 for Macintosh SE / compressed w/ Stuffit 38 / 2021-06-16 / a23b0d995508bb74ba5b7f52bd64e96abb851b6b /
/
(541.04 KiB / 554.03 KB)
1,4MB disk image with minimal system 6.0.8 for any Macintosh / compressed w/ Stuffit 62 / 2021-06-16 / 2b7ab6d9d672665463ca54f1645d04fc94e49d68 /
/
Architecture
System Requirements From Mac OS 6.0 Compatibility notes Any Mac capable to run system 6.0.8
|
SCSI2SD-Tools-Disk-Mac-Plus.sit
Emulating this? It could probably run under: 
Basilisk II
