(There's no video for AutoCAD yet. Please contribute to MR and add a video now!)
AutoCAD is a CAD (3D) design and rendering software suite.
AutoCAD version R11 and R12 for 68K FPU-equipped Macs.
Note: disk images inside main R11 and R12 archives are packaged using ShrinkWrap (also available on this site).
Recommend rebooting with extensions off to install (hold shift during boot up until the system tells you extensions are off)
To install, drag-n-drop all .img files into ShrinkWrap, thus mounting them. Open the "Install" disk, and run the installer. If you get any errors about this not being the correct Install disk, see the above note about turning off extensions.
If you are on a PPC equipped mac, you will need to also install PowerFPU, which is included in this archive.
This procedure verified on a Powerbook G4 Titanium running OS 9.2.2. Works exceptionally well.
AutoCAD_R11-R12.sit_.bin (12.11 MiB / 12.69 MB)
AutoCAD R11 and R12 disk images / Binary encoded, use Stuffit Expander
Architecture: 68K with FPU
Mac OS 7.x or Mac OS 9.x (but NOT compatible with mac OS 8.x)
Note: This software requires a FPU. If your Mac does not have one, you can emulate it (much slower) using Software FPU.
Emulating this? It should run fine under: Basilisk II